I was called to a home in Crosby to trace a fault on a lighting circuit. An earlier investigation had included opening part of the floor, but the cause was still unclear.
During work on a loft wall, a piece of brickwork had fallen onto a cable lying loose on the floor. There was no obvious mark on the outside to show where it had been struck. I traced the fault to the damaged section of cable.
I repaired the cable with a joint in a junction box and clipped the cable to the wall, clear of the loft floor. The lighting circuit passed its insulation resistance test, and I restored power to the circuit.
If part of your lighting has stopped working after building work, send me your postcode and tell me which lights are affected.